Vook VDT2716XD-P Manuel d'utilisateur télécharger pdf (Page 40)

DVR User Manual

(SSL); user can setup mail servers (such as Gmail) as required.

Send address/password: Sender‟s email address/password

Receive address: Receiver‟s email address. Here user can add at least three mail addresses.

Click TEST button to test the validity of the mailbox.

Attaching image: After selecting it, the system will attach images when sending the

emails.

Fig 4-29 Network Configuration-Email

4.6.4 Server

This function is mainly used for connecting ECMS. The setting steps are as follows:

Step 1: In the server tab, select “enable” as shown in the Fig 4-30.

Step 2: Check the IP address and port of the transfer media server in the ECMS. The

default server port for auto report is 2009. If it is modified, please enter into the

transfer media interface to check.

Step 3: Enable the auto report in the ECMS when adding a new device. Then input the

remaining information of the device in the ECMS. After that, the system will auto

allot a Device ID. Please check it in the ECMS. Fig 4-30 Network Configuration-Server

Step 4: Input the above-mentioned server IP, server port and device ID in the server interface .Then click “Apply” button to save settings.

Now, the ECMS system will automatically connect this device.

4.6.5 Other Settings

If your DVR is setup to use PPPoE as its default network connection, you may setup DDNS to be used in connection. The setting steps are

VOOK

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 106 107

Pas de commentaire

Vook VDT2716XD-P Manuel d'utilisateur Page 40