Vook VDT2716XD-P Manuel d'utilisateur

VOOKHD-SDIDigital video recorders VDT2704XD-P ; VDT2708XD-P ; VDT2716XD-PVOOK

DVR User Manual 4 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don‟t power up the unit till the p

DVR User Manual 94 VOOK

DVR User Manual 95 Appendix B Calculate Recording Capacity Users can calculate the required size of hard disk according to the total recording du

DVR User Manual 96 Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity SSK 512MB, 1G, 2GB Netac 4GB Kingston 2G

DVR User Manual 97 3. Compatible HDD listBrand Capacity Seagate Barracuda 80G/160G/250G/320G /1.5T/2TB Seagate SV35.3 1T Seagate Pipeline HD.2 500G Ma

DVR User Manual 98 Appendix D VDT2704XD-P 4-CH Specifications Compression format H.264 Main Profile Video output CVBS×1, HDMI×1, VGA×1 Video Inp

DVR User Manual 99 Appendix D VDT2708XD-P 8-CH Specifications Compression format H.264 Main Profile Video output CVBS×1, HDMI×1, VGA×1 Video Inp

DVR User Manual 100 Appendix D VDT2716XD-P 16-CH Specifications Compression format H.264 Main Profile Video output CVBS×1, HDMI×1, VGA×1 Video

450011000337 A0VOOK

DVR User Manual 5 Step2: Unscrew and take the barrier out of the front panel. Then connect the power and data cables. Finally, put the DVD with the ho

DVR User Manual 6 Name Description BACKUP button Enter backup mode in live Info button Check recording data Search button Enter into search mode P.T.Z

DVR User Manual 7 Fig 2-3 Rear Panel for 4-CH Item Name Description 1 Alarm out Relay Output. Connect to external alarm. 2 Alarm in Connect to ext

DVR User Manual 8 Fig 2-4 Rear Panel for 8-CH Fig 2-5 Rear Panel for 16-CH Item Name Description 1 HD SD Video in HD SDI video signal inputs. 2 Al

DVR User Manual 9 Item Name Description 3 HDMI port Connect to high-definition display device 4 VGA port VGA output, connect to monitor 5 LAN Network

DVR User Manual 10 Fig 2-6 Remote Controller Button Function Power Button Switch off—to stop DVR. Use it before turning off the power Record Button To

DVR User Manual 11 Wiper Button To enable wiper function in PTZ mode Light Button To enable light function in PTZ mode Clear Button To return to the p

DVR User Manual 12 below steps:  Activate remote controller to control the DVR: Turn the IR sensor of the remote controller towards the IR receiver

DVR User Manual 13 Fig 2-7 Digital Numbers and Letters Input Window It supports mouse drag. For e.g. setting up motion detection area, cl

DVR User Manual CAUTION  Please read this user manual carefully to ensure that you can use the device correctly and safely. We do not warrant all th

DVR User Manual 14 3 Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power o

DVR User Manual 15 Step2: Click OK. Then the unit will power off after a while. Step3: Disconnect the power 3.2 Login User can login or log off the

DVR User Manual 16 3.3.1 Live Playback Click Play button to play the record. Refer to Figure3-3. User can do complete operation by clicking the bu

DVR User Manual 17 4 Main Menu Setup Guide Click right mouse or press menu button on the front panel to display the menu tool bar on the bottom of t

DVR User Manual 18 Fig 4-2(a) main menu Fig 4-2(b) System Setup 4.1 Basic Configuration Basic configuratio

DVR User Manual 19 Fig 4-3 Basic Configuration-Basic Show System Time: If selected, displays the current time during live monitoring. Max Online

DVR User Manual 20 4.1.2 Date & Time Step1: Enter into MenuSetupBasicDate & Time tab. Refer to Fig 4-4: Step2: Set the date format, time f

DVR User Manual 21 4.2 Live Configuration Live configuration includes three submenus: live, main monitor and mask. 4.2.1 Live In this tab, user ca

DVR User Manual 22 picture. Right click to exit. Click apply button to save the setting. Delete mask area: select a certain mask area and double click

DVR User Manual 23 4.3 Record Configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and sna

DVR User Manual Table of Contents1 Introduction ...

DVR User Manual 24 Note: If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically. Fig 4-10

DVR User Manual 25 4.3.4 Stamp Stamp：This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also

DVR User Manual 26 4.3.6 Snap In this interface, user can set up resolution, quality, snap interval, snap number. 4.4 Schedule Configuration Schedu

DVR User Manual 27 4.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer

DVR User Manual 28 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor

DVR User Manual 29 To alarm out: If selected, this would trigger the external relay output on detecting a sensor based alarm. Email: If you selec

DVR User Manual 30 Step3: The setup steps of motion trigger are similar to „Alarm Handling‟. You can refer to Chapter 4.5.1 Sensor Alarm Handling for

DVR User Manual 31 4.5.3 Video Loss Step1

DVR User Manual 32 normal schedule setup; you can refer to 4.4.1 Schedule for details. This step is very important for alarm out. Even if

DVR User Manual 33 password. Once the setup is completed, your DVR will automatically dial up into your network. Step 4: No matter wha

DVR User Manual 4.2.1 Live ...

DVR User Manual 34 (SSL); user can setup mail servers (such as Gmail) as required. Send address/password: Sender‟s email address/password Receive addr

DVR User Manual 35 as follows: Step 1: Select Other Settings tab. Enable DDNS server. Step2: Select DDNS server. Step 3: Input user name, password a

DVR User Manual 36 Step 3: Click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Step 4: Create user account. For example, the use

DVR User Manual 37 DDNS server DDNS server Website provided by dynamic domain name supplier. The optional: www.meibu.com ，www.dyndns.com, www.no-ip.c

DVR User Manual 38 Step 5: Select Authority tab and then assign the operation rights for particular user. Refer to fig 4-34. Fig 4-34 Add User-Author

DVR User Manual 39 Fig 4-35 P.T.Z Configuration-Serial Port Definitions

DVR User Manual 40 Fig 4-36 P.T.Z Configuration-Advanced Fig 4-37 Advanced-Preset Step 3:

DVR User Manual 41 dialog box as Fig 4-40:  Click Add icon to set the speed and time of preset point; select a preset point and then click Delete

DVR User Manual 42 4.9 Advanced Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list. 4.9.1 Reset This would r

DVR User Manual 43 5 Search，Playback & Backup Search configuration includes four submenus: time search, event search, file management and image.

DVR User Manual 4.8 P.T.Z Configuration ...

DVR User Manual 44 Step4: Select the channel display mode and click button to play record. Use the playback toolbar to control the playback. Note:

DVR User Manual 45 Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderl

DVR User Manual 46 Fig 5-3 Search Configuration-File Management Lock: Select a file and click Lock button to lock this file. Once locked, the file ca

DVR User Manual 47 refer to 4.5 Alarm Configuration for details. 5.5 Backup This unit supports backup by built-in SATA DVD Writer or USB flash dri

DVR User Manual 48 6 Manage DVR 6.1 Check System Information Check system information includes six submenus: system, event, log, network, online us

DVR User Manual 49 6.1.6 Record Information In this tab, a user can check resolution, ftp and record status including sensor based recording, motion

DVR User Manual 50 Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that soft

DVR User Manual 51 Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc. If using DHCP, please enable

DVR User Manual 52 2. Connect the DVR to internet through PPPoE directly. Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to enable PPP

DVR User Manual 53 Third: Select “open in 32- bit mode”. 6.7.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window

DVR User Manual 6.7.1 On LAN ...

DVR User Manual 54 Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork interface to

DVR User Manual 55 following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control

DVR User Manual 56 6.8 Remote Preview Fig 6-2 Remote Live Preview Symbol and function Definitions: ① Channel indicator ② Screen display mode ③ Vol

DVR User Manual 57 Snap pictures The system will automatically capture pictures and save those pictures in the computer by clicking “Snap” icon. Us

DVR User Manual 58 Auto scan Wiper button Light button Click the right mouse on the live interface to display a pull-down menu as below Fig 6-3

DVR User Manual 59 6.9 Remote Playback & Backup 6.9.1 Remote Playback Click button to enter into record playback interface. Refer to Fig 6-4:

DVR User Manual 60 Step1: Enter into SearchTime search. Refer to Fig 6-5: Fig 6-5 Time Search Interface Step 2: The highlight date in the area 2 ind

DVR User Manual 61 Fig 6-6 Playback by Event Search By Event Search: Step1: Enter into SearchEvent Search. Refer to Fig 6-7: VOOK

DVR User Manual 62 Fig 6-7 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: moti

DVR User Manual 63 Step 2: Select highlighted date and channels. Step 3: Click “Search” button to search the recorded files. Fig 6-8 File Management

DVR User Manual 1 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed especially for CCTV system. It adopts high

DVR User Manual 64 6.9.2 Remote Backup Click Backup button to enter into backup interface. Refer to Fig 6-9: Fig 6-9 Remote Backup Interface Step1:

DVR User Manual 65 Fig 6-10 Remote System Configuration The sub menu list and the options in every menu are similar to that of the DVR. Please refer

DVR User Manual 66 System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the DVR. Pleas

DVR User Manual 67 7 Mobile Surveillance This DVR supports mobile surveillance by phones with Windows mobile, symbian, android, Iphone and Blackberr

DVR User Manual 68 the server. Refer to the below picture on the left: Step6：Camera 1 is the default channel after login. Change the channel in rollin

DVR User Manual 69 Step2：Input the DVR server‟s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer to the picture on

DVR User Manual 70 Step9：Enter Live View, it will connect the server and display pictures. Refer to the picture on the left: Notice: User name and p

DVR User Manual 71 Step 3: Click Superlive-pro, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL”

DVR User Manual 72 Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to

DVR User Manual 73 Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button

DVR User Manual 2  Support saving recorded files with AVI standard format to a remote computer through internetRECORD & PLAYBACK  Record modes:

DVR User Manual 74 Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button

DVR User Manual 75 Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the

DVR User Manual 76 4. Playback Click icon to enter into the playback interface. Then click „Search‟ button, select the time and channel t

DVR User Manual 77 5. Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the

DVR User Manual 78 7. Information View Interface Click icon to enter into information view interface. You can check the information of system,

DVR User Manual 79 Step 1: Run Google Market program Step 2: Search “Supercam” Step 3: Press “Install” butto

DVR User Manual 80 Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click but

DVR User Manual 81 Image view Record playback Stop playing Single channel display Screen mode Four channels display Snap PTZ Talk Recor

DVR User Manual 82 Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select t

DVR User Manual 83 Information view 7.5 By Phones with Blackberry OS 1. Open the browser of BlackBerry phone and enter sever address

DVR User Manual 3  Support event log recording and checking, events unlimitedNETWORK  Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser

DVR User Manual 84 2. Click “Supercam” to link 3. Click “Download” button on the popup interface and the download progress will be shown.

DVR User Manual 85 Note：When user used the Supercam software in mobile phone with touch screen, there will be compatible problem. Sol

DVR User Manual 86 Live view Note: User can click Return button on the Blackberry phone to return the previous interface. VOOK

DVR User Manual 87 Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full scre

DVR User Manual 88 Information view VOOK

DVR User Manual 89 Appendix A FAQ Q1. Why the DVR doesn’t turn on even after connecting to the power? a. The power adapter could have gone bad. Ple

DVR User Manual 90 a. Make sure the HDD was formatted prior to use. b. Maybe the user hasn‟t enabled the record function or has done incorrect setup.

DVR User Manual 91 b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1

DVR User Manual 92 Click the password or the input box a small keyboard will pop up. Please select characters to be input (the initial password is 123

DVR User Manual 93 Fig 13-1 Fig 13-2 Q14. How to play the backup file? a. Insert your