Vook VDT2716XD-P Manuel d'utilisateur télécharger pdf (Page 20)

DVR User Manual

3 Basic Function Instruction

3.1 Startup & Shutdown

Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding

the life of your DVR.

3.1.1 Startup

Step1: Connect with the source power.

Step2: The device will boot and the power LED would turn blue.

Step3 A WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, record

configuration and disk management. User can setup here and refer to the concrete setup steps from the corresponding chapters. If users

don‟t want to setup Wizard, please click Exit button to exit.

Note: This DVR can only display options on either VGA/HDMI monitor or CVBS monitor at a given point of time. If there is live image

display without menu options, please check if there is display on other device/monitor, or long press „Exit‟ button. Long press Exit key

can switch the output between CVBS and VGA/HDMI.

3.1.2 Shutdown

You can shut down the device by using IR remote controller and mouse.

By IR remote controller:

Step1: Press Power button. This will bring up a shutdown window. Then the unit will shut down by clicking “OK” button.

Step2: Disconnect the power.

By mouse:

Step1: Enter into Menu and select “Shut Down” icon. This will take you to a shutdown window.

VOOK

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 106 107

Pas de commentaire

Vook VDT2716XD-P Manuel d'utilisateur Page 20