Vook VDT2716XD-P Manuel d'utilisateur télécharger pdf (Page 58)

DVR User Manual

2. Connect the DVR to internet through PPPoE directly.

Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to enable PPPoE and then input user name and password received

from your ISP. Next, click „Apply‟. The DVR will connect to the server and would give a confirmation message.

Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main

menuInformationNetwork interface to check IP address).

Step 3: If users want to utilize dynamic domain name, please apply for a domain name in a DNS server supported by the DVR or router.

Then add to the DVR or router.

Step 4: The following setting steps are as the same as Step3 and Step4 in Point 1.

6.7 Remote Surveillance through Apple PC

Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the

browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped.

The Setting steps are as follows:

First: Right click safari icon and select “Show in Finder”.

Second: Select ApplicationsRight click “Safari. App”Select “Get Info”.

VOOK

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 106 107

Pas de commentaire

Vook VDT2716XD-P Manuel d'utilisateur Page 58