Vook VDT2716XD-P Manuel d'utilisateur télécharger pdf (Page 30)

DVR User Manual

Note: If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.

Fig 4-10 Record Configuration-Record Bitrate

4.3.3 Time

Step1: Enter into MenuSetupRecordTime tab. Refer to Fig 4-11:

Pre-alarm record time: The record time prior to actual triggering of an alarm

i.e. record time before motion detection or a sensor alarm was triggered.

Post-alarm record: Set the post recording time after the alarm is finished,

five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.

Expire time: The time till which the records would be retained. If the set date

is overdue, the recorded files will be deleted automatically.

Step2: Select “All” to setup all channels with the same parameters.

Step3: Click “Apply” to save the setting; click “Exit” to exit the current

interface.

Fig 4-11 Record Configuration-Time

Parameter

Meaning

Rate

Range from: 1-30(NTSC)/1-25(PAL)

Resolution

Support 1080P

Quality

The higher the value is, the clearer the

recorded image is. Six options: lowest,

lower, low, medium, higher and highest.

Encode

VBR and CBR

Max bit

stream

Range from: 1536kbps~12288kbps

VOOK

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 106 107

Pas de commentaire

Vook VDT2716XD-P Manuel d'utilisateur Page 30