Vook DVR Manuel d'utilisateur télécharger pdf (Page 61)

Digital Video Recorder User Manual

Fig 4.10 Alarm Out Configuration

Alarm out: set relay alarm out channel. You can select any alarm channels.

To record: set recording channels. You can select any record channels. It will record the cameras you choose here when

alarm triggered.

Buzzer: enable buzzer on board for alarm.

To P.T.Z CH: set linked preset and cruise for alarm. You can select any channel and multi channels as linked channels.

Alarm in holding time(S): the interval time between the two adjacent efficient sensor alarms. If a second alarm is

detected in Hold time again, it is recognized as a continuous alarm. If a second alarm is detected after hold time, this alarm

and the previous are recognized as two different alarm events.

Alarm out holding time(S): set relay alarm out time after alarm triggered.

Buzzer holding time(S): set on board buzzer time after alarm triggered.

4.2.6 Motion Configuration

Click MOTION to enter motion configuration as Fig 4.11 Motion Configuration.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 119 120

Pas de commentaire

Vook DVR Manuel d'utilisateur Page 61